Specialist Products
E1E10 can provide a range of standard or custom metal manufactured products, along with all the associated “nuts and bolts” as used in all Data Centres and communication rooms.
19” Front Panels, Fixings and Shelves














1Pack of 10 PlenaFill™ flat blanking panels equals 270 x 1.75" (44mm) rack mount U's Sheets can be cut to fit any unused space, including less than 1U.
Push fit fixing will be required.



Push fit plastic front panels (also supplied in 3U and 6U) no fixings are required. (Batches of 50 panels)
Can be supplied in any colour with logo/wording embossed on front




Steel flat or folded front panels, any colour 1U to 6U incl + 9U



Brush strip front panels, 1U and 2U for cable entry into rear of  cabinet , but with reduced airflow.



Cable management panels  1U and 2U with steel or velcro  cable supports.



E1E10 provide custom tile replacement plinths in a variety of finishes and colours.
The plinth is designed as a direct replacement for a 600 mm x 600 mm floor tile, without the need to cut the tiles. 

Installation is quick and easy, saving time and money.

When the plinth is clamped to the floor grid and the enclosure bolted to the plinth there is no need for extra  stabilisers, and the enclosures are easily bayed together. 

Because the plinth only occupies a 600 mm deep space, access for cabling is made easy to the front and back  of a 1000 mm deep cabinet by the removal of tiles that are partially covered by the enclosure. 

To conserve chilled air the inside of the plinth can be sealed, if required, with the use of the optional cover plates. Cable entry can be gained safely through brush panels or by removing the cover plates. 

M6 x 12 pan head pozi screws with cagenuts and washers

1U adjustable depth steel shelf, adjust from 550 to 990 mm in depth with a maximum loading of 60KG at full depth.

Cantilever shelving 1U, 2U, 3U and 4U x 200, 300 or 400 mm in depth – Loading 25KG

Specials made to order.