FIRE SUPPRESSION SYSTEM

The UK statistics show that electricity is still the main source of accidental fires in commercial buildings which can not only cause severe disruption to businesses, but can also be a threat to the buildings and their occupants. 
 
The inability to operate your business after even a small electrical fire can be very costly and in some cases can lead to the loss of both short and long term contracts. This can be far more damaging and the consequential losses are not always fully recoverable from the insurers.

  •  E1E10 electrical fire suppression systems use the patented detection tubing which is installed throughout the enclosure and connected to the cylinder valve. 

  • The tubing is then charged with nitrogen and this pressure is utilised to hold back the extinguishant in the cylinder.

  • Should a high temperature or fire occur, the pressurised tubing will burst and the extinguishant will be deployed directly from the burst hole onto the fire.

  • This effectively means the fire has formed the discharge nozzle so it is always exactly in the right location.

  • A switch is also added to the system and is held closed by the pressure. Should the tubing burst or the pressure be lost for any reason then the switch will open and this signal can be used to isolate the power and raise an alarm

When choosing suppression systems to safeguard technical equipment, effectiveness and affordability both need to be borne in mind.

 

In terms of effectiveness, our system offers state-of-the-art protection. Our manufacturing process meets the ISO 9001:2015 standard, while recognition from leading insurance companies is another testament to our quality.

 

As well as sounding the alarm swiftly, our systems immediately spring into action to tackle any outbreak of fire. In the case of an older style detector attached to the ceiling, sensors only react to the smoke once it has started to spread from the original fire site. Our systems enable a faster response, minimising damage and disruption to your operations.

 

Testimonials from satisfied customers bear this out, telling how our equipment speedily found an electrical fire in their workplaces and put it out at source, with either no damage or very little. 

 

At the same time as being a highly effective suppression system. They are designed to be affordable, avoiding the expense of complex electronic solutions. 

Also, where the need is to protect equipment which is already in use, retrofitting can be carried out simply, helping to keep down your costs.

© 2020 by E1E10